1940 Ford Pickup Truck With a LS3 376CI 935 HP & 800 ft-lb Torque

Forddaily

Well-known member
Staff member
administrator
Registered
Local time
Today, 09:58
Joined
Aug 15, 2019
Reaction score
409
Location
US
Feedback score
0
Vehicle(s)
Ford F150 Ford F250 Mustang
1940 Ford Pickup LS3 376CI With 935 HP And 800 ft-lb Torque .jpg


Chris Church’s European-inspired 1940 Ford pickup is not only a show winning truck, but it also took home the award for Best SEMA SUV/Truck by Toyo Tires at the 2018 SEMA show. Chris found the truck at a swap meet for $6,500. It was covered in black tractor paint, had orange wheels, and didn’t have an engine or a transmission. Chris’ wife Angela is a fan of the early 1940 for trucks, so he bought the truck as a project vehicle.
1940 Ford Pickup LS3 376CI With 935 HP And 800 ft-lb Torque 2.jpg

Carolina Kustoms in Portland, Oregon replaced the rusted sections, shaved the door handles and drip rails, straightened the body, welded the hood seam, added 1939 Ford coupe headlights, built new bumpers, and made a honeycomb shaped grill out of aluminum. The cab was modified to accept a single-piece windshield, and a big rear window from a 1952 Ford F1 pickup. New bed pieces were resourced along with the Mar-K bed floor that was customized to open in the center. The rear was topped off with a race-inspired fuel filler, and frenched in Throwback Designs custom taillights. With all of the bodywork done, the truck was painted Porsche PPG Sport Classic Gray.
1940 Ford Pickup LS3 376CI With 935 HP And 800 ft-lb Torque 8.jpg

1940 Ford Pickup LS3 376CI With 935 HP And 800 ft-lb Torque 3.jpg

Schroeder Speed & Custom built a new frame for the truck that uses a Mustang II style IFS front suspension, Wilwood dropped pro spindles, and a set of Slam Specialties SS6 airbags. The rear axle is a Moser 9-inch rearend held in place by a 4-link suspension and Slam SS8 airbags. The truck rolls on a set of two-piece forged VF498 American Racing Wheels with Toyo Proxes R888R tires, all backed by 12.9-inch Wilwood disc brakes for stopping power.
1940 Ford Pickup LS3 376CI With 935 HP And 800 ft-lb Torque 4.jpg

Power comes from a Wegner Motorsports built 376ci LS3 engine with a Whipple 2.9 supercharger. Utilizing all forged internals and a Holley Terminator management system, this engine is a complete beast that puts out 935 hp and 800 ft-lb torque. Delivering that power to the rear wheels is a 4L80E transmission with billet torque converter put together by A-1 Performance Transmission. Controlling the transmission is done with a combination of the push button and paddle shifters from Powertrain Control Solutions. A QA1 carbon fiber driveline transfers power to the rear axle. Gases flow through a set of silver ceramic coated 321 stainless steel headers custom built by Ultimate Headers. The 3-inch collectors are attached to titanium-wrapped Borla exhaust, and the sound is tamed via Borla XR1 mufflers. A C&R Racing cooling system complete with an intercooler and custom radiator help keep temperatures in check.
1940 Ford Pickup LS3 376CI With 935 HP And 800 ft-lb Torque 5.jpg

Modernizing the interior is a host of red leather and carbon-fiber inserts. Jim’s Custom Upholstery customized a set of TMI Products seats and covered them in leather with stitching to tie in the honeycomb design. For improved functions, an ididit steering column with Billet Specialties wheel was installed. The dash has been enhanced with a custom bezel that holds the Dakota Digital HDX gauges and Restomod Air A/C vents. Cruising tunes are provided by a Rockford Fosgate system controlled by an Alpine Halo9 touch-screen head unit.
1940 Ford Pickup LS3 376CI With 935 HP And 800 ft-lb Torque 7.jpg
1940 Ford Pickup LS3 376CI With 935 HP And 800 ft-lb Torque 9.jpg

1940 Ford Pickup LS3 376CI With 935 HP And 800 ft-lb Torque 6.jpg
1940 Ford Pickup LS3 376CI With 935 HP And 800 ft-lb Torque 10.jpg


Source: BlueOvalTrucks
 
Last edited:
Top